NEWS

How to use hose fittings

Hydraulic fittings connect conductors such as hoses, pipes and tubes in a hydraulic system. Most fittings have a male and female component that join to form a connection. These connections help contain and direct the flow of hydraulic fluid in the conductor while preventing leaks and maintaining pressure. Different fittings allow designers to change flow direction, the elevation of lines or split flow. Crimping is the most common method for assembling hoses and fittings. Once the crimp specifications have been checked for the specific hose and fitting, a crimping machine is adjusted to the appropriate crimping diameter setting.

Figuring out Which Hydraulic Flange Fittings to apply

Hydraulic connections mate pipes, hoses or tubes together or to additives including cylinders, pumps, valves or ports in other gadget. They're used to make sure that they do not experience a hydraulic machine leak. These components integrate to make certain the machine is freed from leaks or different failure below high pressures. Because of certain connection configurations and programs, hydraulic flange fittings or separate flanges are the nice or on occasion the only sensible way to make an green and leak free connection.

How to Distinguish BSP and BSPT

BSPT (British Standard Pipe Taper) is similar to NPT except there are important differences. The angle across the flanks of threads (if you sliced the fitting in half long-ways and measured the angle from root to crest to root) is 55 degrees instead of 60 degrees as it is for NPT.

Holiday Notice of the 2022 Chinese National Day

Chinese National Day is celebrated on October 1st every year to commemorate the founding of the People’s Republic of China. The People's Republic of China has been set up for 73 years. Wish our country always beautiful, always prosperous and wish the motherland has become more prosperous and developed. all Chinese will have holidays to celebrate anniversary of the founding of China.

How do you tighten a JIC fitting?

For JIC flare fittings, it is crucial to collect the fittings inside the designed torque values a good way to Attain the designed pressure as according to SAE J514 standards. Below torque and over torque will result in Layout pressure loss. Step 1: take a look at on possible infection or harm on becoming surface and sealing floor. Reduce the tube In keeping with the duration required and flare the tube head to a 37-diploma before set up.

Hydraulic System Debugging

During the flow of hydraulic oil in the hydraulic system, the flow direction and flow of the liquid are unstable and difficult to predict, especially over long distances.The application of the pressure test point in the hydraulic system is helpful for the debugging of the system. And can improve the working performance of the system. Such a complex hydraulic system is difficult to debug and maintain. This feature should be fully considered in the design process, and every possible means should be used to improve and enhance the performance of the system.

How to find a professional Hydraulic hose fitting supplier ?

What does the Pehel machinery factory do? Ningbo Pehel Machinery Co.,Ltd are a professional factory to prduce Hydraulic components ，Locked in the second largest port in China -Ningbo